Python Enhancement Proposals

PEP 659 – Specializing Adaptive Interpreter

PEP
659
Title
Specializing Adaptive Interpreter
Author
Mark Shannon <mark at hotpy.org>
Status
Draft
Type
Informational
Created
13-Apr-2021
Post-History
11-May-2021

Contents

Abstract

In order to perform well, virtual machines for dynamic languages must specialize the code that they execute to the types and values in the program being run. This specialization is often associated with “JIT” compilers, but is beneficial even without machine code generation.

A specializing, adaptive interpreter is one that speculatively specializes on the types or values it is currently operating on, and adapts to changes in those types and values.

Specialization gives us improved performance, and adaptation allows the interpreter to rapidly change when the pattern of usage in a program alters, limiting the amount of additional work caused by mis-specialization.

This PEP proposes using a specializing, adaptive interpreter that specializes code aggressively, but over a very small region, and is able to adjust to mis-specialization rapidly and at low cost.

Adding a specializing, adaptive interpreter to CPython will bring significant performance improvements. It is hard to come up with meaningful numbers, as it depends very much on the benchmarks and on work that has not yet happened. Extensive experimentation suggests speedups of up to 50%. Even if the speedup were only 25%, this would still be a worthwhile enhancement.

Motivation

Python is widely acknowledged as slow. Whilst Python will never attain the performance of low-level languages like C, Fortran, or even Java, we would like it to be competitive with fast implementations of scripting languages, like V8 for Javascript or luajit for lua. Specifically, we want to achieve these performance goals with CPython to benefit all users of Python including those unable to use PyPy or other alternative virtual machines.

Achieving these performance goals is a long way off, and will require a lot of engineering effort, but we can make a significant step towards those goals by speeding up the interpreter. Both academic research and practical implementations have shown that a fast interpreter is a key part of a fast virtual machine.

Typical optimizations for virtual machines are expensive, so a long “warm up” time is required to gain confidence that the cost of optimization is justified. In order to get speed-ups rapidly, without noticeable warmup times, the VM should speculate that specialization is justified even after a few executions of a function. To do that effectively, the interpreter must be able to optimize and deoptimize continually and very cheaply.

By using adaptive and speculative specialization at the granularity of individual virtual machine instructions, we get a faster interpreter that also generates profiling information for more sophisticated optimizations in the future.

Rationale

There are many practical ways to speed-up a virtual machine for a dynamic language. However, specialization is the most important, both in itself and as an enabler of other optimizations. Therefore it makes sense to focus our efforts on specialization first, if we want to improve the performance of CPython.

Specialization is typically done in the context of a JIT compiler, but research shows specialization in an interpreter can boost performance significantly, even outperforming a naive compiler 1.

There have been several ways of doing this proposed in the academic literature, but most attempt to optimize regions larger than a single bytecode 1 2. Using larger regions than a single instruction, requires code to handle deoptimization in the middle of a region. Specialization at the level of individual bytecodes makes deoptimization trivial, as it cannot occur in the middle of a region.

By speculatively specializing individual bytecodes, we can gain significant performance improvements without anything but the most local, and trivial to implement, deoptimizations.

The closest approach to this PEP in the literature is “Inline Caching meets Quickening” 3. This PEP has the advantages of inline caching, but adds the ability to quickly deoptimize making the performance more robust in cases where specialization fails or is not stable.

Performance

The expected speedup of 50% can be broken roughly down as follows:

  • In the region of 30% from specialization. Much of that is from specialization of calls, with improvements in instructions that are already specialized such as LOAD_ATTR and LOAD_GLOBAL contributing much of the remainder. Specialization of operations adds a small amount.
  • About 10% from improved dispatch such as super-instructions and other optimizations enabled by quickening.
  • Further increases in the benefits of other optimizations, as they can exploit, or be exploited by specialization.

Implementation

Overview

Once any instruction in a code object has executed a few times, that code object will be “quickened” by allocating a new array for the bytecode that can be modified at runtime, and is not constrained as the code.co_code object is. From that point onwards, whenever any instruction in that code object is executed, it will use the quickened form.

Any instruction that would benefit from specialization will be replaced by an “adaptive” form of that instruction. When executed, the adaptive instructions will specialize themselves in response to the types and values that they see.

Quickening

Quickening is the process of replacing slow instructions with faster variants.

Quickened code has number of advantages over the normal bytecode:

  • It can be changed at runtime
  • It can use super-instructions that span lines and take multiple operands.
  • It does not need to handle tracing as it can fallback to the normal bytecode for that.

In order that tracing can be supported, and quickening performed quickly, the quickened instruction format should match the normal bytecode format: 16-bit instructions of 8-bit opcode followed by 8-bit operand.

Adaptive instructions

Each instruction that would benefit from specialization is replaced by an adaptive version during quickening. For example, the LOAD_ATTR instruction would be replaced with LOAD_ATTR_ADAPTIVE.

Each adaptive instruction maintains a counter, and periodically attempts to specialize itself.

Specialization

CPython bytecode contains many bytecodes that represent high-level operations, and would benefit from specialization. Examples include CALL_FUNCTION, LOAD_ATTR, LOAD_GLOBAL and BINARY_ADD.

By introducing a “family” of specialized instructions for each of these instructions allows effective specialization, since each new instruction is specialized to a single task. Each family will include an “adaptive” instruction, that maintains a counter and periodically attempts to specialize itself. Each family will also include one or more specialized instructions that perform the equivalent of the generic operation much faster provided their inputs are as expected. Each specialized instruction will maintain a saturating counter which will be incremented whenever the inputs are as expected. Should the inputs not be as expected, the counter will be decremented and the generic operation will be performed. If the counter reaches the minimum value, the instruction is deoptimized by simply replacing its opcode with the adaptive version.

Ancillary data

Most families of specialized instructions will require more information than can fit in an 8-bit operand. To do this, an array of specialization data entries will be maintained alongside the new instruction array. For instructions that need specialization data, the operand in the quickened array will serve as a partial index, along with the offset of the instruction, to find the first specialization data entry for that instruction. Each entry will be 8 bytes (for a 64 bit machine). The data in an entry, and the number of entries needed, will vary from instruction to instruction.

Data layout

Quickened instructions will be stored in an array (it is neither necessary not desirable to store them in a Python object) with the same format as the original bytecode. Ancillary data will be stored in a separate array.

Each instruction will use 0 or more data entries. Each instruction within a family must have the same amount of data allocated, although some instructions may not use all of it. Instructions that cannot be specialized, e.g. POP_TOP, do not need any entries. Experiments show that 25% to 30% of instructions can be usefully specialized. Different families will need different amounts of data, but most need 2 entries (16 bytes on a 64 bit machine).

In order to support larger functions than 256 instructions, we compute the offset of the first data entry for instructions as (instruction offset)//2 + (quickened operand).

Compared to the opcache in Python 3.10, this design:

  • is faster; it requires no memory reads to compute the offset. 3.10 requires two reads, which are dependent.
  • uses much less memory, as the data can be different sizes for different instruction families, and doesn’t need an additional array of offsets.
  • can support much larger functions, up to about 5000 instructions per function. 3.10 can support about 1000.

Example families of instructions

CALL_FUNCTION

The CALL_FUNCTION instruction calls the (N+1)th item on the stack with top N items on the stack as arguments.

This is an obvious candidate for specialization. For example, the call in len(x) is represented as the bytecode CALL_FUNCTION 1. In this case we would always expect the object len to be the function. We probably don’t want to specialize for len (although we might for type and isinstance), but it would be beneficial to specialize for builtin functions taking a single argument. A fast check that the underlying function is a builtin function taking a single argument (METHOD_O) would allow us to avoid a sequence of checks for number of parameters and keyword arguments.

CALL_FUNCTION_ADAPTIVE would track how often it is executed, and call the call_function_optimize when executed enough times, or jump to CALL_FUNCTION otherwise. When optimizing, the kind of the function would be checked and if a suitable specialized instruction was found, it would replace CALL_FUNCTION_ADAPTIVE in place.

Specializations might include:

  • CALL_FUNCTION_PY_SIMPLE: Calls to Python functions with exactly matching parameters.
  • CALL_FUNCTION_PY_DEFAULTS: Calls to Python functions with more parameters and default values. Since the exact number of defaults needed is known, the instruction needs to do no additional checking or computation; just copy some defaults.
  • CALL_BUILTIN_O: The example given above for calling builtin methods taking exactly one argument.
  • CALL_BUILTIN_VECTOR: For calling builtin function taking vector arguments.

Note how this allows optimizations that complement other optimizations. For example, if the Python and C call stacks were decoupled and the data stack were contiguous, then Python-to-Python calls could be made very fast.

LOAD_GLOBAL

The LOAD_GLOBAL instruction looks up a name in the global namespace and then, if not present in the global namespace, looks it up in the builtins namespace. In 3.9 the C code for the LOAD_GLOBAL includes code to check to see whether the whole code object should be modified to add a cache, whether either the global or builtins namespace, code to lookup the value in a cache, and fallback code. This makes it complicated and bulky. It also performs many redundant operations even when supposedly optimized.

Using a family of instructions makes the code more maintainable and faster, as each instruction only needs to handle one concern.

Specializations would include:

  • LOAD_GLOBAL_ADAPTIVE would operate like CALL_FUNCTION_ADAPTIVE above.
  • LOAD_GLOBAL_MODULE can be specialized for the case where the value is in the globals namespace. After checking that the keys of the namespace have not changed, it can load the value from the stored index.
  • LOAD_GLOBAL_BUILTIN can be specialized for the case where the value is in the builtins namespace. It needs to check that the keys of the global namespace have not been added to, and that the builtins namespace has not changed. Note that we don’t care if the values of the global namespace have changed, just the keys.

See 4 for a full implementation.

注解

This PEP outlines the mechanisms for managing specialization, and does not specify the particular optimizations to be applied. The above scheme is just one possible scheme. Many others are possible and may well be better.

Compatibility

There will be no change to the language, library or API.

The only way that users will be able to detect the presence of the new interpreter is through timing execution, the use of debugging tools, or measuring memory use.

Costs

Memory use

An obvious concern with any scheme that performs any sort of caching is “how much more memory does it use?”. The short answer is “none”.

Comparing memory use to 3.10

The following table shows the additional bytes per instruction to support the 3.10 opcache or the proposed adaptive interpreter, on a 64 bit machine.

Version 3.10 3.10 opt 3.11 3.11
Specialised 20% 20% 25% 33%
quickened code 0 0 2 2
opcache_map 1 1 0 0
opcache/data 6.4 4.8 4 5.3
Total 7.4 5.8 6 7.3

3.10 is the current version of 3.10 which uses 32 bytes per entry. 3.10 opt is a hypothetical improved version of 3.10 that uses 24 bytes per entry.

Even if one third of all instructions were specialized (a high proportion), then the memory use is still less than that of 3.10. With a more realistic 25%, then memory use is basically the same as the hypothetical improved version of 3.10.

Security Implications

None

Rejected Ideas

Too many to list.

References

1 (1, 2)
The construction of high-performance virtual machines for dynamic languages, Mark Shannon 2010. http://theses.gla.ac.uk/2975/1/2011shannonphd.pdf
2
Dynamic Interpretation for Dynamic Scripting Languages https://www.scss.tcd.ie/publications/tech-reports/reports.09/TCD-CS-2009-37.pdf
3
Inline Caching meets Quickening http://www.complang.tuwien.ac.at/kps09/pdfs/brunthaler.pdf
4
Adaptive specializing examples (This will be moved to a more permanent location, once this PEP is accepted) https://gist.github.com/markshannon/556ccc0e99517c25a70e2fe551917c03

Source: https://github.com/python/peps/blob/master/pep-0659.rst

Last modified: 2021-09-17 18:18:24 GMT